Refrigerant and air conditioning system tester Manifold Gauge. Electronic manometer for refrigeration and air conditioning. Max/Min memory and clear. Shift temperature / pressure units. Refrigerant and air conditioning system tester, electronic manometer for refrigeration and air conditioning. Used to measure the pressure difference between atmospheric pressure and refrigerant thinning. It makes it possible to diagnose a potential system fault by comparing the pressure of the high pressure side and the low pressure side pressure with the specification of the air conditioning system. Advantages of the electronic manometer. Reading from electronic manometer with backlit LCD scale. Rubber covers that protect manometers from damage. Service of 83 refrigerants factors. Blue pressure gauge – low pressure. Red pressure gauge – high pressure. Blue wire – with knurled connection. Red wire – with knurled connection. Charging cable – yellow high-pressure hose with knurled connection (for filling agents, emptying air-conditioning). 0,100 5,000MPa. Pressure: ± 0.5% FS. Pressure: 0.001 MPa. 10 60 ; 35% 85% RH. 37x17mm LCD display with green backlight, automatic shutdown after 6 seconds. MPa, kPa, bar, psi, kgf / cm2, mmHg. Complete list of refrigerants set from the menu. The item “Digital 2 Manometer Tool SET Manifold Gauge Test Refrigeration Air conditioning” is in sale since Wednesday, May 15, 2019. This item is in the category “Business, Office & Industrial\HVAC\HVAC Tools\HVAC Gauges”. The seller is “termoplus2003″ and is located in Warszawa, mazowieckie. This item can be shipped to all countries in Europe.
- Manifold Purpose: Charging
- Gauge Purpose: Pressure
- Refrigerant: R-12
- MPN: DMG-1B
- Number of Valves: 2
- Gauge Features: Digital
- Brand: Elitech
- Equipment Type: Manifold, Gauge & Hose Set
Digital Vacuum Gauge VG64. The ever popular VG64 Digital Vacuum Gauge has now been upgraded to include a magnetic HVAC strap. The VG-64 accurately reads vacuum from 12,000 microns down to 0 over a Wide Temperature Range. The Digital Vacuum Gauge is suitable for field or laboratory use. The vacuum can be displayed in user selectable units: Microns (milliTorrs), PSI, milliBars, Inches of Hg and Pascal. Great for Vacuum Measurements during System Evacuation or High Precision Laboratory Tests. NOTE: A 9-Volt Battery is Required. Vacuum Displayed in 7 International Units/Scales (Micron, PSI, InHg, mbar, Pascal, Torr, mTorr). Magnetic HVAC strap included UPGRADE. Fast Update Rate (Every 1/2 Second) Low Power Dissipation Out of Temperature Range Indicator Good Accuracy at Higher Pressures (above 300 Microns) 10 Minute Auto Shut Off Only When no Vacuum is Detected Self Diagnostic and Sensor Dirty Indicator. Standard 1/4 Male Flare Fitting. 0 to 12,000 Microns (0 to 1,600 Pascals) with Vacuum increasing/decreasing indicator when above 12,000 Microns. 0 to 200: 1 Micron 201 to 500: 5 Microns 501-1,000: 10 Microns 1,001 to 2,000: 50 Microns 2,001 to 5,000: 250 Microns 5,001 to 8,000: 500 Microns 8,001 to 12,000: 1,000 MicronsSelectable Units: Micron, PSI, InHg, mbar, Pascal, Torr, mTorr. 35°F to 125°F (2°C to 52°C). 9 Volt Alkaline Battery (Not Included). After 10 Minutes when vacuum reading is above 12,000 Microns (12 Torr). 5 1/2 H x 3 W x 1 1/4 D. ALL PRICES INCLUDE VAT AT 20%. SEVAC LTD CANNOT BE HELD RESPONSIBLE FOR INCORRECT PURCHASING OF PRODUCTS. All goods are sent securely packaged via a reputable carrier. Sevac ltd is a reputable long established company based in south essex supplying parts and consumables used within automotive air conditioning. The item “Digital Vacuum Gauge air conditioning refrigeration Javac VG64 -new” is in sale since Tuesday, March 8, 2016. This item is in the category “Vehicle Parts & Accessories\Garage Equipment & Tools\Air Conditioning Tools”. The seller is “sevacltd” and is located in ESSEX. This item can be shipped to United Kingdom.
- Manufacturer Part Number: VG 64
- Brand: supco